by Marketing | Sep 22, 2026 | Bambu Lab How-To
When a print finishes perfectly, the last thing you want is to damage the build plate or crack the model during removal. The easiest technique is also the one people skip most often: let the plate cool first. Quick answer: Allow the build plate and part to cool,...
by Marketing | Sep 18, 2026 | Bambu Lab How-To
Supports are a compromise. Put them too close to the model and the underside can look cleaner, but removal becomes difficult. Leave too much separation and the support comes off easily, but the overhang can sag. The best settings depend on the material, geometry,...
