Why Your Bambu Print Is Stringing or Looking Rough: 8 Things to Check
Work through moisture, temperature, filament condition, nozzle contamination and profile problems when a Bambu print suddenly starts stringing or looking rough.
Read Article
3D Print BC Resources
3D Printing Guides, Ideas & Updates
Practical FDM printing tips, material guidance, project ideas and updates from 3D Print BC. Learn more, plan your next print and get better results.
How to Remove a 3D Print From a Bambu Build Plate Without Damaging It
Learn the safest order for removing finished prints from a Bambu flexible build plate, including cooling, flexing and careful use of a scraper.
Read Article
Found Me! | Free 3D-Printed Surprises in the Lower Mainland
Find free 3D printed surprises in Vancouver and the Lower Mainland! Discover 3D Print BC's Found Me project, report your find and look for dragon prize cards.
Read Article
Bambu Studio Support Settings: How to Make Supports Easier to Remove
A practical guide to support placement, interface choices and the trade-off between easy support removal and clean overhang surfaces in Bambu Studio.
Read Article
How to Create a Custom Filament Profile in Bambu Studio
Create a reusable custom filament profile in Bambu Studio for third-party PLA, PETG and specialty filaments without constantly changing the system preset.
Read Article
How to Tell If Your 3D Printer Filament Is Wet — and What to Do About It
Learn the common signs of moisture in PLA, PETG and other filaments, why wet filament hurts print quality, and how to dry and store it properly.
Read Article
0.4 vs 0.6 mm Nozzle on a Bambu Lab Printer: Which Should You Use?
A practical comparison of 0.4 mm and 0.6 mm Bambu Lab nozzles for detail, speed, strength, abrasive filaments and everyday printing.
Read Article
Bambu Lab AMS Lite Won’t Load or Unload Filament? What to Check
Troubleshoot a Bambu Lab AMS Lite that will not load or unload filament by checking the spool, filament tip, PTFE tubes, feeders, hub and toolhead path.
Read Article
How to Replace the Hotend on a Bambu Lab A1
A practical Bambu Lab A1 hotend replacement guide covering cooling, removal, installation, nozzle settings and a safe test print.
Read Article
How to Clean a Bambu Lab Textured PEI Plate for Better First Layers
Learn how to properly clean a Bambu Lab textured PEI plate, restore first-layer adhesion and avoid common cleaning mistakes.
Read ArticleHave a project in mind?
Upload a File & Get a Quote