by Marketing | Sep 11, 2026 | 3D Printing Tips
Filament can look perfectly normal on the spool and still contain enough moisture to hurt a print. Many thermoplastics absorb water from the air. When damp filament enters a hot nozzle, that moisture can turn to vapour and disrupt the extrusion. Quick answer: Popping...
by Marketing | Sep 8, 2026 | Bambu Lab How-To
Changing nozzle diameter is one of the simplest ways to change how a 3D printer behaves. On a Bambu Lab machine, the common choice is between a 0.4 mm nozzle for general-purpose work and a 0.6 mm nozzle when you want thicker extrusion lines, stronger practical parts,...
by Marketing | Sep 3, 2026 | Bambu Lab How-To
AMS Lite loading problems can look more complicated than they are. You select a filament, the feeder starts moving it, and then the filament reverses, stalls or throws a loading error. The fastest way to troubleshoot the system is not to take everything apart at once....
by Marketing | Aug 27, 2026 | Bambu Lab How-To
The Bambu Lab A1 uses a quick-swap hotend design, so changing a worn, clogged or different-size hotend is much simpler than on many traditional 3D printers. The job is still worth doing carefully: the hotend gets extremely hot, filament may still be loaded, and...
by Marketing | Aug 20, 2026 | Bambu Lab How-To
If a print that normally sticks suddenly starts lifting at the corners, dragging behind the nozzle, or failing during the first few lines, the build plate is one of the first things worth checking. A Bambu Lab textured PEI plate can look perfectly clean while still...
